| Motore di ricerca datesheet componenti elettronici |
|
USB5534B Scheda tecnica(PDF) 28 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
USB5534B Scheda tecnica(HTML) 28 Page - Microchip Technology |
|
28 / 73 page ![]() USB5534B DS00001681C-page 28 2012 - 2015 Microchip Technology Inc. 5.2.17.4 No Port Power Controls This parameter requires setting the hubs power-on time to 0 for both USB 2.0 and USB 3.0 hubs. It also requires the setting of the USB3 PWR_SW_CTL signal. USB POWER-ON TIME (ADVANCED) This parameter sets the USB power-on to power Good time in 2ms intervals for both the USB 2.0 and USB 3.0 hubs. USB 3.0 NO POWER SWITCH SELECT When enabled, the USB 3.0 hub operates in accordance with the USB 3.0 specification for No Power Switches. 5.2.17.5 USB 2.0 Over-Current Timer This setting controls the signal filter on the OCS pin for the USB 2.0 hub. These settings should be controlled with care, as the default configuration has been tested thoroughly. The valid settings are: • 50ns • 1000ns • 200ns • 400ns 5.2.17.6 USB 3.0 Over-Current Timer This setting controls the signal filter on the OCS pin for the USB 3.0 hub. These settings should be controlled with care, as the default configuration has been tested thoroughly. The valid settings are: • 750ns • 10000ns • 1250ns • 1500ns 5.2.18 USB2 PORT DP/DM PIN SWAP This per-port setting internally swaps the DP and DM signals for the USB 2.0 port. Port 0 = UFP Port 1-7 = DFP ports 1-7 5.2.19 USB 2.0 PORT HS OUTPUT CURRENT This per-port setting boosts the USB High-Speed driver output. Port 0 = UFP Port 1-7 = DFP ports 1-7 Settings are defined within the Protouch tool. 5.2.20 USB 2.0 PORT SQUELCH This per-port setting modifies the USB input squelch setting. Port 0 = UFP Port 1-7 = DFP ports 1-7 Settings are defined within the Protouch tool. 5.2.21 USB 2.0 HUB ADVANCED CONTROLS The settings in the following sub-sections are advanced controls, which most applications will not require to be set, since the default configurations allow seamless operation. Only advanced users/applications should override the default con- figurations detailed here. |
|
Link URL |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |