Linear Integrated Systems

• 4042 Clipper Court • Fremont, CA 94538 • Tel: 510 490-9160 • Fax: 510 353-0261

Doc 201135 11/30/2015 Rev#A9 ECN# 2N & SST 4117 4118 4119

1

2

3

SOT-23

DIMENSIONS IN

MILLIMETERS

0.89

1.03

1.78

2.05

1.20

1.40

2.10

2.64

0.37

0.51

2.80

3.04

0.89

1.12

0.013

0.100

0.085

0.180

0.55

*Dimensions in inches

2N4117A, 2N4118A,

2N4119A

TO-72

Four Lead

PN4117, PN4118,

PN4119

TO-92

SST4117, SST4118,

SST4119

SOT-23

NOTES:

1. Due to symmetrical geometry, these units may be operated with source and drain leads interchanged.

2. This parameter is measured during a 2 ms interval 100 ms after power is applied. (Not a JEDEC condition.)

3. Absolute maximum ratings are limiting values above which serviceability may be impaired.

4. Not production tested, guaranteed by design.

Information furnished by Linear Integrated Systems is believed to be accurate and reliable. However, no responsibility is assumed for its use;

nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise

under any patent rights of Linear Integrated Systems.

5.

STANDARD PACKAGE DIMENSIONS:

Linear Integrated Systems (LIS) is a 25-year-old, third-generation precision semiconductor company providing high-quality

discrete components. Expertise brought to LIS is based on processes and products developed at Amelco, Union Carbide, Intersil

and Micro Power Systems by company President John H. Hall. Hall, a protégé of Silicon Valley legend Dr. Jean Hoerni, was the

director of IC Development at Union Carbide, Co-Founder and Vice President of R&D at Intersil, and Founder/President of Micro

Power Systems.