Symbol

Parameter

Conditions

Min

Typ Max

Units

V

OH

High-Level Output Voltage after

Switching

V

V

mV

Note 1: “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. Except for “Operating Temperature Range” they

are not meant to imply that the devices should be operated at these limits. The table of “Electrical Characteristics” provides conditions for actual device operation.

Note 2: Voltage values are with respect to network ground terminal unless otherwise specified.

Note 3: The voltage between two emitters of a multiple-emitter transistor.

Note 4: The maximum voltage which should be applied to any output when it is in the “OFF” state.

Note 5: Both halves of these dual circuits may conduct rated current simultaneously; however, power dissipation averaged over a short time interval must fall within

the continuous dissipation rating.

Note 7: All currents into device pins shown as positive, out of device pins as negative, all voltages referenced to ground unless otherwise noted. All values shown

as max or min on absolute value basis.

DS75451

AB

Y

L

L

L (ON State)

L

H

L (ON State)

H

L

L (ON State)

H

H

H (OFF State)

DS75452

AB

Y

L

L

H (OFF State)

L

H

H (OFF State)

H

L

H (OFF State)

H

H

L (ON State)

DS75453

AB

Y

L

L

L (ON State)

L

H

H (OFF State)

H

L

H (OFF State)

H

H

H (OFF State)

www.national.com

3