TMS570LS0332PZ datasheet(28/110 Pages) TI1

28 / 110 page

TMS570LS0432, TMS570LS0332

SPNS186B – OCTOBER 2012 – REVISED JUNE 2015

www.ti.com

6.2

Power Sequencing and Power-On Reset

6.2.1

Power-Up Sequence

There is no timing dependency between the ramp of the VCCIO and the VCC supply voltage. The power-

up sequence starts with the I/O voltage rising above the minimum I/O supply threshold, (for more details,

see Table 6-4), core voltage rising above the minimum core supply threshold, and the release of power-on

reset. The high-frequency oscillator will start up first and its amplitude will grow to an acceptable level. The

oscillator start-up time is dependent on the type of oscillator and is provided by the oscillator vendor. The

different supplies to the device can be powered up in any order.

During power up, the device goes through the sequential phases listed in Table 6-3.

Table 6-3. Power-Up Phases

Oscillator start-up and validity check

1032 oscillator cycles

eFuse autoload

1160 oscillator cycles

Flash pump power up

688 oscillator cycles

Flash bank power up

617 oscillator cycles

Total

3497 oscillator cycles

The CPU reset is released at the end of this sequence and fetches the first instruction from address

0x00000000.

System Information and Electrical Specifications

Submit Documentation Feedback

Product Folder Links: TMS570LS0432 TMS570LS0332

TMS570LS0332PZ Scheda tecnica(PDF) 28 Page - Texas Instruments