MSP4458 datasheet(53/85 Pages) MICRONAS

53 / 85 page

PRELIMINARY DATA SHEET

MSP 44x8G

Micronas

4.6.2.4. Crystal Recommendations

Symbol

Parameter

Pin Name

Min.

Typ.

Max.

Unit

General Crystal Recommendations

Crystal Parallel Resonance Fre-

quency at 12 pF Load Capacitance

18.432

MHz

Crystal Series Resistance

Ω

Crystal Shunt (Parallel) Capacitance

6.2

7.0

External Load Capacitance1)

XTAL_IN,

XTAL_OUT

PSDIP

approx. 1.5

P(L)QFP approx. 3.3

Crystal Recommendations for Master-Slave Applications (MSP-clock must perform synchronization to I2S clock)

fTOL

Accuracy of Adjustment

−20

+20

ppm

DTEM

Frequency Variation

versus Temperature

−20

+20

ppm

Motional (Dynamic) Capacitance

fCL

Required Open Loop Clock

Frequency (Tamb = 25 °C)

AUD_CL_OUT

18.431

18.433

MHz

Crystal Recommendations for FM / NICAM Applications (No MSP-clock synchronization to I2S clock possible)

fTOL

Accuracy of Adjustment

−30

+30

ppm

DTEM

Frequency Variation

versus Temperature

−30

+30

ppm

Motional (Dynamic) Capacitance

fCL

Required Open Loop Clock

Frequency (Tamb = 25 °C)

AUD_CL_OUT

18.4305

18.4335

MHz

Crystal Recommendations for all analog FM/AM Applications (No MSP-clock synchronization to I2S clock possible)

fTOL

Accuracy of Adjustment

−100

+100

ppm

DTEM

Frequency Variation

versus Temperature

−50

+50

ppm

fCL

Required Open Loop Clock

Frequency (Tamb = 25 °C)

AUD_CL_OUT

18.429

18.435

MHz

Amplitude Recommendation for Operation with External Clock Input (Cload after reset typ. 22 pF)

VXCA

External Clock Amplitude

XTAL_IN

0.7

Vpp

1) External capacitors at each crystal pin to ground are required. They are necessary to tune the open-loop fre-

quency of the internal PLL and to stabilize the frequency in closed-loop operation.

Due to different layouts, the accurate capacitor size should be determined with the customer PCB. The sug-

gested values (1.5...3.3 pF) are figures based on experience and should serve as “start value”.

To define the capacitor size, reset the MSP without transmitting any further I2C telegrams. Measure the fre-

quency at AUD_CL_OUT-pin. Change the capacitor size until the free running frequency matches 18.432 MHz

as closely as possible. The higher the capacity, the lower the resulting clock frequency.

MSP4458 Scheda tecnica(PDF) 53 Page - Micronas

MSP4458 Scheda tecnica(HTML) 53 Page - Micronas

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85

Scheda tecnica Scarica

Link URL