COMPONENTS PRODUCT INFORMATION

CONNECTOR

NEW

1/9

MB-0046-5

October 2006

JAE PMK Div. Proprietary. Copyright ©　2006，Japan Aviation Electronics Industry, Ltd.

Pin connector (pin header) is press fit type (finish diameter: 0.82 to 0.98 dia. ), and the

mounting pitch is 2.54mm. For three contact connector, a wire relay connector is available.

Mold latch ensures complete mating and unmating.

Highly conductive copper alloy is used for contacts, and individual two-point contact system

and gold plating ensure high contact reliability. (CA725 is used for press fit contacts.)

Secondary hook mechanism to secure cable.

Features

<<Overview>>

This product is a high-reliability connector for power units designed for transmission devices,

switcher, and other electrical devices. It occupies a small volume thanks to the use of planar

contacts. Two-contact and three-contact connectors are available.

No. of contacts: 2 or 3 pos.

Contact resistance: 20m ohm max. (Initial)

Withstand voltage: 1000Vr.m.s

(for 1 minute)

Operating temperature: -10 to +65 Deg.C

Rated current: 15A

Mating force: 222.5N max.

Retention force: 44.1N min.

General specifications

Thickness of board: 2.4t min.

Board material: Glass-filled epoxy

Suitable through-hole: 0.82 to 0.98 dia.

Finish diameter: (Target 0.87 to 0.94 dia.)

Through-hole plating: Copper

PW01 Series

Applicable board specifications

High efficiency, high reliability power connector

RoHS　Compliant