7

DATA SHEET ER0002EJ4V0DS00

EC2 SERIES

PACKAGE

GUIDE TO APPLICATIONS

1. When connecting coils, refer to the pin configuration to prevent misoperation or malfunction.

2. The latch type relay should be initialized at the appointed position (set or reset position) when using, and should

be energized or deenergized to the specified polarity to avoid wrong operations by reversed contact state.

3. Soldering should be done at 250 ˚C within 10 sec.

4. Ultrasonic cleaning is not recommended to keep reliable contact performance. Alcohol based solvents are

available as proper solvents.

5. Minimum contact load of the relay is 10 mV, 10

µA.

This value is a reference value in the resistance load.

Minimum capacity changes depending on swiching frequency and environment temperature and the load.

Rubber stopper (Red)

Rubber stopper (Green)

Index Mark

543 1

(2.4)

+

–

11.9 0.3

+

–

( ) Reference

Dimensions of Relay Tube (Unit : mm)

35 pieces / Tube

Material : Polyvinyl chloride

(auti-static treated)

Outline of Package