HAL815 datasheet(4/24 Pages) MICRONAS

4 / 24 page

HAL 815

ADVANCE INFORMATION

Micronas

1.3. Marking Code

The HAL 815 has a marking on the package surface

(branded side). This marking includes the name of the

sensor and the temperature range.

1.4. Operating Junction Temperature Range (TJ)

The Hall sensors from Micronas are specified to the

chip temperature (junction temperature TJ).

A: TJ = −40 °C to +170 °C

K: TJ = −40 °C to +140 °C

E: TJ = −40 °C to +100 °C

The relationship between ambient temperature (TA)

and junction temperature is explained in Section 4.5.

on page 18.

1.5. Hall Sensor Package Codes

Example: HAL815UT-K

→ Type:

815

→ Package:

TO-92UT

→ Temperature Range: T

J = −40°C to +140°C

Hall sensors are available in a wide variety of packag-

ing versions and quantities. For more detailed informa-

tion, please refer to the brochure: “Ordering Codes for

Hall Sensors”.

1.6. Solderability

Package TO-92UT: according to IEC68-2-58

During

soldering

reflow

processing

and

manual

reworking, a component body temperature of 260 °C

should not be exceeded.

Components stored in the original packaging should

provide a shelf life of at least 12 months, starting from

the date code printed on the package labels, even in

environments as extreme as 40 °C and 90% relative

humidity.

1.7. Pin Connections and Short Descriptions

Fig. 1–1: Pin configuration

Type

Temperature Range

HAL 815

815A

815K

815E

HALXXXPA-T

Temperature Range: A, K, or E

Package: UT for TO-92UT

Type: 815

No.

Pin Name

Type

Short Description

1VDD

Supply Voltage and

Programming Pin

GND

Ground

OUT

Push Pull Output

and Selection Pin

VDD

OUT

GND

HAL815 Scheda tecnica(PDF) 4 Page - Micronas

HAL815 Scheda tecnica(HTML) 4 Page - Micronas

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Scheda tecnica Scarica

Link URL