USB5734 datasheet(20/61 Pages) MICROCHIP

20 / 61 page

USB5734

DS00001854D-page 20

 2015-2016 Microchip Technology Inc.

3.4.5.1

Configuration 1 - Mixed Mode

When the CFG_STRAP is configured to this mode, the programmable function pins (PROG_FUNC[7:1]) are set to pro-

vide an SMBus/I2C interface, 3 GPIOs, and FlexConnect capabilities. Table 3-16 details the PROG_FUNC[7:1] pin

assignments in this mode.

TABLE 3-16:

CONFIGURATION 1 PROG_FUNC[7:1] FUNCTION ASSIGNMENT

Function

Buffer

Type

Description

PROG_FUNC1

GPIO1

I/O12

General Purpose Input/Output 1

PROG_FUNC2

GPIO2

I/O6

General Purpose Input/Output 2

PROG_FUNC3

GPIO3

I/O12

General Purpose Input/Output 3

PROG_FUNC4

SMDAT

OD12

SMBus/I2C Data

The SMBus/I2C interface acts as SMBus slave or I2C bridge

dependent on the device configuration. Refer to Section 3.4.1,

"SPI/SMBus/I2C/UART Configuration (I2C_SLV_CFG[1:0])".

PROG_FUNC5

SMCLK

OD12

SMBus/I2C Clock

The SMBus/I2C interface acts as SMBus slave or I2C bridge

dependent on the device configuration. Refer to Section 3.4.1,

"SPI/SMBus/I2C/UART Configuration (I2C_SLV_CFG[1:0])".

PROG_FUNC6

FLEXCMD

FlexConnect Control

0: Normal Operation (Port 0 upstream, Port 1 downstream)

1: Flex Operation (Port 1 upstream, Port 0 downstream)

Note:

Refer to Section 8.2, "FlexConnect" for additional

information.

PROG_FUNC7

USB2_SUSP_IND

O10

USB2.0 Suspend Indicator

USB2_SUSP_IND can be used as a sideband remote wakeup

signal for the host when in USB2.0 suspend.

Note:

Refer to Section 8.5, "Remote Wakeup Indicator"

for additional information.

USB5734 Scheda tecnica(PDF) 20 Page - Microchip Technology

USB5734 Scheda tecnica(HTML) 20 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61

Scheda tecnica Scarica

Link URL