| Motore di ricerca datesheet componenti elettronici |
|
LAN9250 Scheda tecnica(PDF) 49 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
LAN9250 Scheda tecnica(HTML) 49 Page - Microchip Technology |
|
49 / 421 page ![]() 2015 Microchip Technology Inc. DS00001913A-page 49 LAN9250 To determine when the host interface is functional, the Byte Order Test Register (BYTE_TEST) should be polled. Once the correct pattern is read, the interface can be considered functional. At this point, the Device Ready (READY) bit in the Hardware Configuration Register (HW_CFG) or the Power Management Control Register (PMT_CTRL) can be polled to determine when the device is fully awake. For both automatic and manual wake-up, the Device Ready (READY) bit will go high once the device is returned to power savings state D0 and the PLL has re-stabilized. The PM_MODE and PM_SLEEP_EN fields in the Power Man- agement Control Register (PMT_CTRL) will also clear at this point. Under normal conditions, the device will wake-up within 2 ms. 6.3.5 POWER MANAGEMENT REGISTERS 6.3.5.1 Power Management Control Register (PMT_CTRL) This read-write register controls the power management features and the PME pin of the device. The ready state of the device be determined via the Device Ready (READY) bit of this register. Offset: 084h Size: 32 bits Note: This register can be read while the device is in the reset or not ready / power savings states without leaving the host interface in an intermediate state. If the host interface is in a reset state, returned data may be invalid. It is not necessary to read all four bytes of this register. DWORD access rules do not apply to this register. Bits Description Type Default 31:29 Power Management Mode (PM_MODE) This register field determines the chip level power management mode that will be entered when the Power Management Sleep Enable (PM_SLEEP_EN) bit is set. 000: D0 001: D1 010: D2 011: D3 100: Reserved 101: Reserved 110: Reserved 111: Reserved Writes to this field are ignored if Power Management Sleep Enable (PM_SLEEP_EN) is also being written with a 1. This field is cleared when the device wakes up. R/W/SC 000b |
|
Link URL |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |