ACTF8062 datasheet(2/2 Pages) ACT

2 / 2 page

5. Performance

5-1. Maximum Ratings

Rating

Value

Unit

Input Power Level

+15

dBm

DC Voltage

VDC

Storage Temperature Range

Tstg

-40 to +125

℃

Operable Temperature Range

-40 to +125

℃

5-2. Electronic Characteristics

Characteristic

Minimum

Typical

Maximum

Unit

Center Frequency

(center frequency between 3dB points)

868.300

MHz

Insertion Loss

3.5

4.5

3dB Pass band

BW3

800

950

1050

kHz

Rejection

at fC -21.4 MHz (Image)

at fC -10.7 MHz (LO)

Ultimate

Temperature

Turnover Temperature

℃

Turnover Frequency

MHz

Frequency Temperature Coefficient

FTC

0.032

ppm/℃

Frequency Aging

Absolute Value during the First Year

|fA|

ppm/yr

CAUTION: Electrostatic Sensitive Device. Observe precautions for handling!

○

NOTE:

The frequency fC is defined as the midpoint between the 3dB frequencies.

Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is

connected to a 50

Ω test system with VSWR≤1.2:1. The test fixture L is adjusted for minimum insertion loss at the

filter center frequency, fC. Note that insertion loss, bandwidth, and passband shape are dependent on the

impedance matching component values and quality.

Unless noted otherwise, specifications apply over the entire specified operating temperature range.

Frequency aging is the change in fC with time and is specified at +65°C or less. Aging may exceed the

specification for prolonged temperatures above +65°C. Typically, aging is greatest the first year after manufacture,

decreasing in subsequent years.

Turnover temperature, T0, is the temperature of maximum (or turnover) frequency, f0. The nominal frequency at

any case temperature, TC, may be calculated from: f = f0 [1 - FTC (T0 - TC)

2].

The specifications of this device are based on the test circuit shown above and subject to change or obsolescence

without notice.

All equipment designs utilizing this product must be approved by the appropriate government agency prior to

manufacture or sale.

Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications,

processes and circuits implemented within components or assemblies.

ACTF8062 Scheda tecnica(PDF) 2 Page - Advanced Crystal Technology

ACTF8062 Scheda tecnica(HTML) 2 Page - Advanced Crystal Technology

Html Pages

1 2

Scheda tecnica Scarica

Link URL