ONLINE PRODUCT REGISTRATION: Register your MSD product online. Registering your product

will help if there is ever a warranty issue with your product and helps the MSD R&D team create

new products that you ask for! Go to www.msdperformance.com/registration.

MSD LS Ignition Control

PN 6014/60143

Parts Included:

1 – LS Ignition Controller, PN 6014

1 – Main Wiring Harness

1 – Crank/Cam Pigtail 24x

1 – Crank/Cam Pigtail 58x

1 – Sub Harness

1 – USB Cable

1 – Mounting Kit

1 – MSDView USB

WARNING: During installation, disconnect the battery cables. When disconnecting, always re-

move the negative cable first and install it last.

Note: Solid core spark plug wires cannot be used with an MSD Ignition Control.

OPERATION

The MSD 6014 LS Ignition controller works with 24x/1x, 58x/4x and 58x/1x crank/cam configura-

tions. It auto detects the correct configuration based on the reluctor wheel pattern, so there is no

need to select one. It provides six pre-programmed (non-editable) timing tables for stock engines,

three customizable 3-D tables and one customizable timing plot. The desired table/plot is selected

on the fly using the rotary dial. The customizable tables and plot can be programmed via MSDView.

The LS Ignition controller includes a built-in 2.5 Bar MAP sensor that can be used with Naturally

Aspirated or boosted applications. This allows for timing advance or retard based on the intake

manifold pressure.

8Mb of internal data logging is also included so you can setup, record and review runs at the track.

Note: It is recommended, that you install and run MSDView software while connected to the unit to

perform the base settings. The unit can be powered off of USB, so this can be done from a

desktop or laptop and does not require an external power source.

Optional Accessories (Purchased Separately):

LS Coolant Temp Sensor, GM PN 12608814

PN 2279 - 24x Crank/4x Cam