SOLOMO

SOLOMO

SOLOMO

SOLOMON SYSTECH LIMITED

N SYSTECH LIMITED

N SYSTECH LIMITED

N SYSTECH LIMITED

SEMICONDUCTOR TECHNICAL DATA

This document contains information on a new product under definition stage. Solomon Systech Ltd. reserves the right to change or

discontinue this product without notice.

Copyright

 2003 SOLOMON Systech Limited

Rev 0.23

08/2003

SSD1332

Product Preview

OLED/PLED Segment/Common Driver with Controller

CMOS

General Description

SSD1332 is a single-chip CMOS OLED/PLED driver with controller for organic/polymer light

emitting diode dot-matrix graphic display system. SSD1332 consists of 288 segments (96RGB) and 64

commons. This IC is designed for Common Cathode type OLED panel.

SSD1332 displays data directly from its internal 96x64x16 bits Graphic Data RAM (GDDRAM).

Data/Commands are sent from general MCU through the hardware selectable 6800/8000 series

compatible Parallel Interface or Serial Peripheral Interface. SSD1332 has a 256 steps contrast control

and 65K color control.

FEATURES

Support max. 96RGB x 64 matrix panel

Power supply: VDD=2.4V - 3.5V

VCC=8.0V - 18.0V

OLED driving output voltage, 16V maximum

DC-DC voltage converter

Segment maximum source current: 200uA

Common maximum sink current: 50mA

Embedded 96x64x16 bit SRAM display buffer

16 step master current control, and 256 step current control for the three color components

Programmable Frame Rate

Graphic Acceleration Command Set (GAC)

8-bit 6800-series Parallel Interface, 8-bit 8080-series Parallel Interface, Serial Peripheral

Interface.

Wide range of operating temperature: -30 to 85

°C