YR2.DIODE

Y-Series

Input and output

Type

Bi-stable, quick-connect spring clamp terminals.

IP20 Finger safe construction.

Suitable for field- and factory installation.

Shipped in open position.

Solid wire

Stranded wire

American Wire Gauge

20-10 AWG

Max. wire diameter

2.8mm (including ferrule)

Wire stripping length

10mm / 0.4inch

Pull-out force

10AWG:80N, 12AWG:60N, 14AWG:50N, 16AWG:40N (according to UL486E)

Fig. 6-1 Connecting a wire

1. Insert the wire

2. Snap the lever

Instructions:

a) Use appropriate copper cables that are designed for

minimum operating temperatures of:

60°C for ambient up to 45°C and

75°C for ambient up to 60°C and

90°C for ambient up to 70°C minimum.

b) Follow national installation codes and installation

regulations!

c) Ensure that all strands of a stranded wire enter the

terminal connection!

d) Ferrules are allowed.

e) Do not connect or disconnect the wires from the

terminals below -25°C (-13°F).

To disconnect wire: same procedure vice versa

Apr. 2014 / Rev. 1.4 DS-YR2.DIODE-EN

All parameters are specified at 24V, 20A output current, 25°C ambient and after a 5 minutes run-in time unless otherwise noted

www.pulspower.com Phone +49 89 9278 0

Germany

7/19