NOTES: UNLESS OTHERWISE SPECIFIED

1. EPOXY COATING

2. 63Sn/37Pb EUTECTIC BUMP

3. RECOMMEND NON-SOLDER MASK DEFINED LANDING PAD.

4. PIN 1 IS ESTABLISHED BY LOWER LEFT CORNER WITH RESPECT TO TEXT ORIENTATION. REMAINING PINS ARE

NUMBERED COUNTER CLOCKWISE.

5. XXX IN DRAWING NUMBER REPRESENTS PACKAGE SIZE VARIATION WHERE X1 IS PACKAGE WIDTH, X2 IS PACK-

AGE LENGTH AND X3 IS PACKAGE HEIGHT.

6.NO JEDEC REGISTRATION AS OF AUG.1999.

micro SMD, 5 Bump Package (BPA05)

NS Package Number BPA05A

For Order Numbers, refer to

Table 1 in the “Order Information” section of this document.

The dimensions for X1, X2 and X3 are as given:

X1 = 0.930 +/− 0.030mm

X2 = 1.107 +/− 0.030mm

X3 = 0.850 +/− 0.050mm

www.national.com

15