CS8920 datasheet(61/66 Pages) CIRRUS

61 / 66 page

AN84REV1

CS8920 Technical Reference Manual

1) Install the CS8920-based adapter

card into the PC. The adapter must

be installed before running the Setup

and Installation utility.

2) Boot the PC. If the PC is already

running and network device drivers

are loaded, restart the PC without

loading the network device drivers.

3) Place the “CS8900/CS8920 Setup

and Device Driver Software”

diskette in a floppy drive and change

to that drive.

4) At the DOS prompt, type: SETUP

The CS8920’s current configuration

is displayed. Hit the RETURN key

to get to the main menu.

5) Select “Adapter” (ALT-A) from the

main menu. Then select “Automatic

Setup” or “Manual Setup”.

Automatic Setup suggests a set of

system resources to use for the

hardware configuration. Manual

Setup lets you select and assign

individual system resources.

Additional information on using the

Setup and Installation Utility can be

found in the README.TXT file in the

root directory of the “CS8900/CS8920

Setup and Device Driver Software”

diskette.

4.2.2.1 EISA System Installation

An EISA configuration file is provided

in the root directory of the

“CS8900/CS8920 Setup and Device

Driver Software” diskette named

!CS89XX.CFG.

Run the EISA configuration utility

provided with your EISA PC and enter

the path to the !CS89XX.CFG file when

prompted. The utility will determine the

system resource assignments available

for that system. (Write down the

available resource settings). Next, run

the CS8920 Setup and Installation utility

and assign the hardware configuration

using the system resources reported by

the EISA configuration utility.

4.2.3 Testing the CS8920 Adapter

Once the adapter has been installed and

configured, the diagnostic option of the

Setup and Installation utility can be used

to test the functionality of the adapter

and the network connection. Use the

Diagnostics “Self Test” option to test the

functionality of the adapter with the

hardware configuration you have

assigned. You can use the diagnostics

“Network Test” to test the ability of the

adapter to communicate across the

Ethernet with another PC equipped with

a CS8920 adapter card (it must also be

running the Setup and Installation

utility).

To run the diagnostics tests on the

CS8920 adapter:

1) Boot the PC. If the PC is already

running and network device drivers

are loaded, restart the PC without

loading the network device drivers.

2) Place the “CS8900/CS8920 Setup

and Device Driver Software”

diskette in a driver and change to

that drive.

3) At the DOS prompt, type: SETUP

The CS8920’s current configuration

is displayed. Hit the RETURN key

to get to the main menu.

CS8920 Scheda tecnica(PDF) 61 Page - Cirrus Logic

CS8920 Scheda tecnica(HTML) 61 Page - Cirrus Logic

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66

Scheda tecnica Scarica

Link URL