STM32L151C6 datasheet(100/133 Pages) STMICROELECTRONICS

100 / 133 page

Electrical characteristics

STM32L151x6/8/B STM32L152x6/8/B

100/133

DocID17659 Rev 12

dOffset/dT(1)

Offset error temperature

coefficient (code 0x800)

VDDA = 3.3V, TA = 0 to 50 ° C

DAC output buffer OFF

-20

-10

µV/°C

VDDA = 3.3V, TA = 0 to 50 ° C

DAC output buffer ON

020

Gain(1)

Gain error(6)

CL ≤ 50 pF, RL ≥ 5 kΩ

DAC output buffer ON

+0.1 /

-0.2%

+0.2 / -

0.5%

No RLOAD, CL ≤ 50 pF

DAC output buffer OFF

+0 / -0.2%

+0 / -0.4%

dGain/dT(1)

Gain error temperature

coefficient

VDDA = 3.3V, TA = 0 to 50 ° C

DAC output buffer OFF

-10

-2

µV/°C

VDDA = 3.3V, TA = 0 to 50 ° C

DAC output buffer ON

-40

-8

TUE(1)

Total unadjusted error

CL ≤ 50 pF, RL ≥ 5 kΩ

DAC output buffer ON

-12

LSB

No RLOAD, CL ≤ 50 pF

DAC output buffer OFF

-8

tSETTLING

Settling time (full scale:

for a 12-bit code

transition between the

lowest and the highest

input codes till

DAC_OUT reaches final

value ±1LSB

CL ≤ 50 pF, RL ≥ 5 kΩ

µs

Update rate

Max frequency for a

correct DAC_OUT

change (95% of final

value) with 1 LSB

variation in the input

code

CL ≤ 50 pF, RL ≥ 5 kΩ

Msps

tWAKEUP

Wakeup time from off

state (setting the ENx bit

in the DAC Control

CL ≤ 50 pF, RL ≥ 5 kΩ

µs

PSRR+

VDDA supply rejection

ratio (static DC

measurement)

CL ≤ 50 pF, RL ≥ 5 kΩ

-60

-35

1. Guaranteed by characterization results.

2. Difference between two consecutive codes - 1 LSB.

3. Difference between measured value at Code i and the value at Code i on a line drawn between Code 0 and last Code 4095.

4. Difference between the value measured at Code (0x800) and the ideal value = V/2.

5. Difference between the value measured at Code (0x001) and the ideal value.

6. Difference between ideal slope of the transfer function and measured slope computed from code 0x000 and 0xFFF when

buffer is OFF, and from code giving 0.2 V and (VDDA – 0.2) V when buffer is ON.

7. In buffered mode, the output can overshoot above the final value for low input code (starting from min value).

Table 57. DAC characteristics (continued)

Symbol

Parameter

Conditions

Min

Typ

Max

Unit

STM32L151C6 Scheda tecnica(PDF) 100 Page - STMicroelectronics

STM32L151C6 Scheda tecnica(HTML) 100 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Scheda tecnica Scarica

Link URL