A6984 datasheet(33/47 Pages) STMICROELECTRONICS

Il numero della parte	A6984

Spiegazioni elettronici	36 V, 400 mA automotive synchronous step-down switching regulator

PDF	47 Pages

Scroll/Zoom	100%

Produttore elettronici	STMICROELECTRONICS [STMicroelectronics]

Homepage	http://www.st.com

Logo

33 / 47 page

DocID030396 Rev 1

33/47

A6984

Device description

4.8

PGOOD

The internal circuitry monitors the regulated output voltage and keeps the PGOOD open

collector output in low impedance as long as the feedback voltage is below the VPGD L

threshold (see Table 5 on page 7).

Figure 26. PGOOD behavior during soft-start time with electronic load

The PGOOD is driven low impedance if VFB = VCC (internal voltage divider, see Section 4.1

on page 13) and VBIAS > VPGD H threshold (see Table 5).

The VPGD H threshold has no effect on PGOOD behavior in case the external voltage divider

is being used.

4.9

Overvoltage protection

The overvoltage protection monitors the FB pin and enables the low-side MOSFET to

discharge the output capacitor if the output voltage is 20% over the nominal value. A new

soft-start takes place after the OVP event ends.

A6984 Scheda tecnica(PDF) 33 Page - STMicroelectronics