SPC56EL54X datasheet(109/165 Pages) STMICROELECTRONICS

109 / 165 page

DocID15457 Rev 12

109/165

SPC56ELx, SPC564Lx

Electrical characteristics

164

SPC56XL60/54 makes a transition from HPREG1 to HPREG2. This transition is dynamic.

Once HPREG2 is fully operational, the controller part of HPREG1 is switched off.

The following bipolar transistors are supported:



BCP68 from ON Semiconductor



BCX68 from Infineon

The recommended external ballast transistor is the bipolar transistor BCP68 with the gain

range of 85 up to 375 (for IC=500mA, VCE=1V) provided by several suppliers. This includes

the gain variations BCP68-10, BCP68-16 and BCP68-25.The most important parameters for

the interoperability with the integrated voltage regulator are the DC current gain (hFE) and

the temperature coefficient of the gain (XTB). While the specified gain range of most BCP68

vendors is the same, there are slight variations in the temperature coefficient parameter.

SPC56XL60/54 Voltage regulator operation was simulated against the typical variation on

temperature coefficient and against the specified gain range to have a robust design.

Table 19. Characteristics

Symbol

Parameter

Value

Unit

hFE( )

DC current gain (Beta)

85 - 375

—

Maximum power dissipation @

TA=25°C(1)

1.5

ICMaxDC

Maximum peak collector current

1.0

VCESAT

Collector-to-emitter saturation

voltage (Max)

600(2)

VBE

Base-to-emitter voltage (Max)

1.0

1. Derating factor 12mW/degC.

2. Adjust resistor at bipolar transistor collector for 3.3V to avoid VCE<VCESAT.



Table 20. Voltage regulator electrical specifications

Symbol

Parameter

Conditions

Min

Typ

Max

Unit

Cext

External decoupling/

stability capacitor

Min, max values shall be

granted with respect to

tolerance, voltage,

temperature, and aging

variations.

—

µF

Combined ESR of

external capacitor

—

100



Number of pins for

external decoupling/

stability capacitor

—5

—

CV1V2

Total capacitance on

1.2 V pins

Ceramic capacitors,

taking into account

tolerance, aging, voltage

and temperature

variation

300

—

900

tSU

Start-up time after main

supply stabilization

Cload = 10 µF × 4

—

2.5

SPC56EL54x Scheda tecnica(PDF) 109 Page - STMicroelectronics

SPC56EL54x Scheda tecnica(HTML) 109 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Scheda tecnica Scarica

Link URL