STM8L151C2 datasheet(96/122 Pages) STMICROELECTRONICS

96 / 122 page

Electrical parameters

STM8L151x2, STM8L151x3

96/122

DocID018780 Rev 9

Sampling time

VAIN on PF0 fast

channel

VDDA < 2.4 V

0.43(4)(5)

µs

VAIN on PF0 fast

channel

2.4 V

≤VDDA≤ 3.6 V

0.22(4)(5)

µs

VAIN on slow channels

VDDA < 2.4 V

0.86(4)(5)

µs

VAIN on slow channels

2.4 V

≤VDDA≤ 3.6 V

0.41(4)(5)

µs

tconv

12-bit conversion time

12 + tS

1/fADC1

16 MHz

1(4)

µs

tWKUP

Wakeup time from OFF

state

µs

tIDLE(6)

Time before a new

conversion

TA = +25 °C

1(7)

TA = +70 °C

20(7)

TA = +125 °C

2(7)

tVREFINT

Internal reference

voltage startup time

refer to

Table 44

1. The current consumption through VREF is composed of two parameters:

- one constant (max 300 µA)

- one variable (max 400 µA), only during sampling time + 2 first conversion pulses.

So, peak consumption is 300+400 = 700 µA and average consumption is 300 + [(4 sampling + 2) /16] x 400 = 450 µA at

1Msps

2. VREF- or VDDA must be tied to ground.

3. Guaranteed by design.

4. Minimum sampling and conversion time is reached for maximum Rext = 0.5 k

Ω.

5. Value obtained for continuous conversion on fast channel.

6. The time between 2 conversions, or between ADC1 ON and the first conversion must be lower than tIDLE.

7. The tIDLE maximum value is ∞on the “Z” revision code of the device.

Table 48. ADC1 characteristics (continued)

Symbol

Parameter

Conditions

Min

Typ

Max

Unit

STM8L151C2 Scheda tecnica(PDF) 96 Page - STMicroelectronics

STM8L151C2 Scheda tecnica(HTML) 96 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Scheda tecnica Scarica

Link URL