STM32F302C8 datasheet(133/138 Pages) STMICROELECTRONICS

133 / 138 page

DocID025147 Rev 6

133/138

STM32F302x6 STM32F302x8

Package information

134

7.5.2

Selecting the product temperature range

When ordering the microcontroller, the temperature range is specified in the ordering

information scheme shown in Section 8: Ordering information.

Each temperature range suffix corresponds to a specific guaranteed ambient temperature at

maximum dissipation and, to a specific maximum junction temperature.

As applications do not commonly use the STM32F302x6 STM32F302x8 at maximum

dissipation, it is useful to calculate the exact power consumption and junction temperature

to determine which temperature range will be best suited to the application.

The following examples show how to calculate the temperature range needed for a given

application.

Example 1: High-performance application

Assuming the following application conditions:

Maximum ambient temperature TAmax = 82 °C (measured according to JESD51-2),

IDDmax = 50 mA, VDD = 3.5 V, maximum 3 I/Os used at the same time in output at low

level with IOL = 8 mA, VOL= 0.4 V and maximum 2 I/Os used at the same time in output

at low level with IOL = 20 mA, VOL= 1.3 V

PINTmax = 50 mA × 3.5 V= 175 mW

PIOmax = 3 × 8 mA × 0.4 V + 2 × 20 mA × 1.3 V = 61.6 mW

This gives: PINTmax = 175 mW and PIOmax = 61.6 mW:

PDmax = 175 + 61.6 = 236.6 mW

Thus: PDmax = 236.6 mW

Using the values obtained in Table 82 TJmax is calculated as follows:

–

For LQFP64, 45°C/W

TJmax = 82 °C + (45°C/W × 236.6 mW) = 82°C + 10.65 °C = 92.65°C

This is within the range of the suffix 6 version parts (–40 < TJ < 105 °C).

In this case, parts must be ordered at least with the temperature range suffix 6 (see

Section 8: Ordering information).

STM32F302C8 Scheda tecnica(PDF) 133 Page - STMicroelectronics