Edison installed on Pi Block

We have a nice Hardware Pack available that gives enough hardware to

secure three blocks and an Edison.

Intel Edison Hardware Pack

NOTE: It is recommended to use a console communication block in

conjunction with this block like ones found in the General Guide to

Sparkfun Blocks for Intel Edison. Once you have the Edison

configured, you can remove the console communication block, power

the Edison from the Pi Block, and SSH into the Edison.

You can put headers on the Edison side, which gives you easy access to

the pin labels. Note that this pinout is mirrored from the Raspberry Pi Model

B pinout.

Headers on Edison side

Alternatively, you can populate the back side of the Pi Block with headers.

This method gives the same pinout as a Raspberry Pi Model B. You could,

in theory, swap the Edison in for your Raspberry Pi on an existing project,

or use Raspberry Pi accessories (e.g. Pi Wedge).

Page 3 of 11