XC6201P201MB datasheet(11/22 Pages) TOREX

11 / 22 page

XC6201

Series

195

■Directions for use

■Test Circuits

GNotes on Use

1. Please use this IC within the stipulated absolute maximum ratings as the IC is liable to malfunction outside of such parameters. When the

voltage on VOUT is larger than that of VIN, for example, when there are two power supply, please insert schottky diode between VOUT and VIN

not to exceed the rating of VOUT.

2. There is a possibility that oscillation may occur as a result of the impedance present between the power supply and the IC's input. Where

impedance is 10

Ω or more, please use a capacitor (CIN) of at least 1µF.

With a large output current, operations can be stabilised by increasing capacitor size (CIN). If CIN is small and capacitor size (CL) is

increased, there is a possibility of oscillation due to input impedance.

In such cases, operations can be stabilised by either increasing the size of CIN or decreasing the size of CL.

3. Please ensure that output current (IOUT) is less than Pd

÷ (VIN - VOUT) and does not exceed the stipulated Continuous Total Power Dissipation

value (Pd) for the package.

VIN

VOUT

VSS

Open

VIN

VOUT

VSS

µF

Measuring Circuit 1 : Supply Current

Measuring Circuit 2 : Output Voltage, Oscillation Check, Line Regulation, Dropout Voltage, Load Regulation

03S_01XC6201 02.9.12 2:35 PM ページ 195

XC6201P201MB Scheda tecnica(PDF) 11 Page - Torex Semiconductor