ST8034HC datasheet(19/31 Pages) STMICROELECTRONICS

Il numero della parte	ST8034HC

Spiegazioni elettronici	24-pin smartcard interfaces

PDF	31 Pages

Scroll/Zoom	100%

Produttore elettronici	STMICROELECTRONICS [STMicroelectronics]

Homepage	http://www.st.com

Logo

19 / 31 page

DocID024511 Rev 2

19/31

ST8034HN, ST8034HC

Functional description

Throughout this document it is assumed that the reader is familiar with ISO7816

terminology.

6.1

Power supplies

All interface signals to the host microcontroller are referenced to VDD(INTF). All card contacts

remain inactive during power-up or power-down. After powering up the device, OFF output

remains low until CMDVCC input is set high and PRES input is low. During power-down,

OFF output goes low when VDDP falls below the VDDP falling threshold voltage. The internal

oscillator clock frequency fOSC(INT) is used only during the activation sequence. When the

card is not activated (CMDVCC input is high), the internal oscillator is in low frequency

mode to reduce power consumption.

Power-on sequence: supply voltages may be applied to the ST8034 in any sequence.

6.2

Voltage supervisor

Figure 6. Voltage supervisor, configured with adjustable VDD(INTF) threshold

ST8034HC Scheda tecnica(PDF) 19 Page - STMicroelectronics