LM3590 datasheet(4/9 Pages) NSC

Il numero della parte	LM3590

Spiegazioni elettronici	LM3590Series White LED Driver

PDF	9 Pages

Scroll/Zoom	100%

Produttore elettronici	NSC [National Semiconductor (TI)]

Homepage	http://www.national.com

Logo

4 / 9 page

Electrical Characteristics (Notes 2, 6) (Continued)

Note 6: All room temperature limits are 100% tested or guaranteed through statistical analysis. All limits at temperature extremes are guaranteed by correlation

using standard Statistical Quality Control methods (SQC). All limits are used to calculate Average Outgoing Quality Level (AOQL). Typical numbers are not

guaranteed, but do represent the most likely norm.

Note 7: The current source is connected internally between VIN and VIOUT. The voltage across the current source, [VIN −VIOUT], is referred to as headroom voltage.

For the current source to regulate properly, a minimum headroom voltage must be present across it. Minimum required headroom voltage is proportional to the

current flowing through the current source, as dictated by this equation: VHR-MIN = 300mV x (IOUT ÷ 20mA).

Note 8: An internal 500k

Ω pull-down resistor is connected between the EN and GND pins.

Functional Block Diagram

20081314

LM3590 Scheda tecnica(PDF) 4 Page - National Semiconductor (TI)

LM3590 Scheda tecnica(HTML) 4 Page - National Semiconductor (TI)

Html Pages

1 2 3 4 5 6 7 8 9

Scheda tecnica Scarica

Link URL