1

Configuration

• Connector 1: SMA Female

• Connector 2: Straight Cut Lead

• Cable Type: PE-034SR

Features

•

100% RF Tested prior to final trim

• 1.35 Max VSWR to 6 GHz

• 100% High Pot Tested to 500V

• .034 Diameter Semi Rigid coax

• Individually packed in protective tube

Applications

• Used as an RF Test Probe to 6

GHz

• RF PCB board measurements

• Signal injection

.

Description

These SMA Female to unterminated flush cut cables assemblies are designed to be used as convenient test probes. The

unterminated end of the cable can be trimmed by the user to their desired dimensions. A common Research and development

application is to solder the trimmed end of the cable to an exposed microstrip trace to inject a signal or to measure a signal of

interest. Each cable assembly is individually packaged in a reusable protective tube. These test probes have been 100% RF

tested as a two ended assembly prior to trimming in order to verify the assemblies perform to 6 GHz with a maximum VSWR

of 1.35:1. Pre-Trimmed Test Probes are also available.

Electrical Specifications

Description

Minimum

Typical

Maximum

Units

Frequency Range

DC

6

GHz

VSWR

1.35:1

Operating Voltage (DC)

500

Vdc

.

Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,

inventory and certifications: Pigtail Test Probe Cable SMA Female to Straight Cut Lead 9 Inch Length Using PE-034SR

Coax, RoHS PE3CA1102-9

PE3CA1102-9 REV 1.1

Pigtail Test Probe Cable SMA Female to Flush Cut

Lead 9 Inch Length Using PE-034SR Coax, RoHS

RF Cable Assemblies Technical Data Sheet

PE3CA1102-9