▪ VIN_Bulk input supply range: 4.25 V to 15.0 V
▪ VIN_Mgmt input supply range: 3.0 V to 3.6 V
▪ Six step-down switching regulators: SWA, SWB,
SWC, SWD, SWE, and SWF
▪ Programmable configuration of one three-phase,
two dual-phase, or six single-phase regulators.
▪ Three or four LDO regulators: One or two VBias
(VBias1, VBias2), VOUT_1.8V, VOUT_1.0V
▪ Automatic switchover from VIN_Mgmt input supply
to VIN_Bulk input supply
▪ Error injection capability
▪ Persistent error log registers with detailed information.
▪ Write-protect and programmable modes of operation
▪ Independently programmable output voltages,
power up and power down sequence for switch regulators
▪ Input and output power-good status reporting mechanism
▪ VIN_Bulk input supply protection feature: Input
over voltage and input under voltage
▪ Output switch regulators protection feature: Output
over voltage, output under voltage, output current limiter
▪ Output current and power measurement, output
current threshold mechanism
▪ Temperature measurement, temperature warning
threshold, critical temperature shutdown
▪ Multi Time Programmable Non-Volatile Memory
▪ MTP Error Check capability
▪ Unique serial number for traceability
▪ Programmable and DIMM specific registers for customization
▪ General Status Interrupt Function
▪ Reset input pin to reset various aspects of PMIC
▪ Auto Power-On capability
▪ VR Output Enable Pin to turn on the regulators
▪ Flexible Open-Drain IO (I2C) or Push-Pull IO (I3C Basic) Support