▪ VIN_Bulk input supply range: 3.0 V to 5.5 V
▪ Four step-down switching regulators: SWA, SWB, SWC, and SWD
▪ Two LDO regulators: VOUT_1.8 V, VOUT_1.0 V
▪ Error injection capability
▪ Persistent error log registers
▪ Secure mode and programmable mode of operation
▪ Independently programmable output voltages,
power-up and power-down sequence for switch regulators
▪ Output power good status reporting mechanism
▪ VIN_Bulk input supply protection feature: Input
over voltage
▪ Output switch regulators protection features:
Output over voltage, output under voltage, output
current limiter
▪ Output current and power measurement, output
current threshold mechanism
▪ Temperature measurement, temperature warning
threshold, critical temperature shutdown
▪ Multi Time Programmable (MTP) Non-Volatile Memory (NVM)
▪ Programmable and CAMM2 specific registers for customization
▪ Flexible Open Drain IO (I2C) and Push Pull (I3C Basic) IO support
▪ Flexible mechanism to enable switch regulators
(with VR_EN pin or VR Enable command on I2C or I3C Basic interface or Auto Power On)
▪ Idle Power State (P1 State)
▪ Unlock input pin to enable putting the PMIC in
programmable mode without a power cycle
▪ Dynamic Voltage Frequency Scaling VDDQ
(DVFSQ) function for SWB with DVFSQ_n pin
▪ SWB Disable Override function
▪ PMIC warranty status bit
▪ Fine resolution ADC (31.25mA/mW step size)