2

REV1.2

www.3peakic.com.cn

TP2011/TP2012/TP2014

Ultra-Low Power 200nA, 1.6V, RRIO, Push-Pull Output Comparators

Order Information

Model Name

Order Number

Package

Transport Media, Quantity

Marking

Information

TP2011

TP2011-TR

5-Pin SOT23

Tape and Reel, 3000

TP2011-CR

5-Pin SC70

Tape and Reel, 3000

TP2011-SR

8-Pin SOIC

Tape and Reel, 4000

2011S

TP2011U

TP2011U-TR

5-Pin SOT23

Tape and Reel, 3000

TP2011U-CR

5-Pin SC70

Tape and Reel, 3000

TP2011U2

TP2011U2-TR

5-Pin SOT23

Tape and Reel, 3000

TP2011N

TP2011N-TR

6-Pin SOT23

Tape and Reel, 3000

TP2012

TP2012-TR

8-Pin SOT23

Tape and Reel, 3000

TP2012-SR

8-Pin SOIC

Tape and Reel, 4000

2012S

TP2012-VR

8-Pin MSOP

Tape and Reel, 3000

2012V

TP2014

TP2014-SR

14-Pin SOIC

Tape and Reel, 2500

TP2014S

TP2014-TR

14-Pin TSSOP

Tape and Reel, 3000

TP2014T

Note (1): ‘YW’ is date coding scheme. 'Y' stands for calendar year, and 'W' stands for single workweek coding scheme.

Pin Functions

N/C: No Connection.

–IN: Inverting Input of the Comparator. Voltage range of

+IN: Non-Inverting Input of Comparator. This pin has the

same voltage range as –IN.

from 1.6V to 5.5V. Split supplies are possible as long as

the voltage between V+ and V– is between 1.6V and

5.5V. A bypass capacitor of 0.1μF as close to the part as

possible should be used between power supply pins or

between supply pins and ground.

to ground. It can also be tied to a voltage other than

from 1.6V to 5.5V. If it is not connected to ground,

bypass it with a capacitor of 0.1μF as close to the

part as possible.

OUT: Comparator Output. The voltage range

extends to within millivolts of each supply rail.

LATCH: Active Low Latch enable. Latch enable

threshold is 1/2V+ above negative supply rail.