UPD17P133CS datasheet(77/289 Pages) NEC

77 / 289 page

CHAPTER 7

SYSTEM REGISTER (SYSREG)

7.7.2 Functions of the Program Status Word

The flags of the program status word are used for setting conditions for arithmetic/logical operations and data

transfer instructions and for reflecting the status of operation results. Figure 7-17 shows an outline of the functions

of the program status word.

Figure 7-17. Outline of Functions of the Program Status Word

7FH

7EH

PSW

RPL

Address

Symbol

Flag

Used to specify that index modification be performed on the data

memory address used when a data memory manipulation instruction is

executed.

0: Index modification disabled.

1: Index modification enabled.

Set when the result of an arithmetic operation is 0.

0: Indicates that the result of the arithmetic operation is a value other

than 0.

1: Indicates that the result of the arithmetic operation is 0.

Set when there is a carry in the result of an addition operation or a

borrow in the result of a subtraction operation.

0: Indicates there was no carry or borrow.

1: Indicates there was a carry or borrow.

Used to specify that the result of an arithmetic operation not be stored

in data memory or the general register but just be reflected in the CY

and Z flags.

0: Results of arithmetic operations are stored.

1: Results of arithmetic operations are not stored.

Used to specify how arithmetic operations are performed.

0: Arithmetic operations are performed in 4-bit binary.

1: Arithmetic operations are performed in BCD.

Flag

Function of PSWORD

IXE

CMP

BCD

Bit

UPD17P133CS Scheda tecnica(PDF) 77 Page - NEC