7

Figure 13. Tape drawing

Figure 14. Reel drawing

USER DIRECTION

OF UNREELING

NOTES:

1. MEASURED FROM THE CENTRELINE OF THE SPROCKET HOLE TO THE CENTRELINE OF THE POCKET

HOLE AND FROM THE CENTRELINE OF THE SPROCKET HOLE TO THE CENTERLINE OF THE POCKET

2. CUMULATIVE TOLERANCE OF 10 SPROCKET HOLES IS ± 0.20

3. THIS THICKNESS IS APPLICABLE AS MEASURED AT THE EDGE OF THE TAPE.

4. MATERIAL: BLACK POLYSTYRENE

5. ALL DIMENSIONS IN MM.

6. ALLOWABLE CAMBER TO BE 1MM PER 250MM IN LENGTH

7. UNLESS OTHERWISE SPECIFIED TOLERANCE ± 0.10.

8. MEASUREMENT POINT TO BE 0.3 FROM BOTTOM POCKET.

9. SURFACE RESISITIVTY FROM 1.0X10 TO 1.0x10 OHMS/SQ

5

11