STSPIN32F0ATR datasheet(25/41 Pages) STMICROELECTRONICS

Il numero della parte	STSPIN32F0ATR

Spiegazioni elettronici	Advanced BLDC controller with embedded STM32 MCU

PDF	41 Pages

Scroll/Zoom	100%

Produttore elettronici	STMICROELECTRONICS [STMicroelectronics]

Homepage	http://www.st.com

Logo

25 / 41 page

STSPIN32F0A

Device description

DocID030766 Rev 2.0

25/41

Figure 10: Linear regulator output characteristics

The linear regulator is designed to supply the internal circuitry only and must not

be used to supply external components.

6.4

Standby mode

The device is forced into the standby mode to reduce power consumption forcing both the

OC_TH_STBY1 and OC_TH_STBY2 analog IC inputs low (see Table 12: "OC threshold

values").

When the standby mode is set the analog IC is put into the low consumption mode after

a tsleep time, in particular:

•

The linear regulator is switched off

•

All the output drivers are forced low (external power switches turned off)

•

Op amps and comparators disabled

•

The DC/DC regulator remains operative.

When the device exits from the standby mode a set time is necessary to recover a proper

value of the 12 V internal regulator. This set time is strictly dependent by the capacitor

connected on the VREG12 pin and can be calculated with Equation 1.

[V]

VREG12

[V]

7.5

7.2

STSPIN32F0ATR Scheda tecnica(PDF) 25 Page - STMicroelectronics