ASPM34 datasheet(10/15 Pages) ONSEMI

Il numero della parte	ASPM34

Spiegazioni elettronici	Automotive 3?뭁hase 1200 V, 35 A IGBT Intelligent Power Module

PDF	15 Pages

Scroll/Zoom	100%

Produttore elettronici	ONSEMI [ON Semiconductor]

Homepage	http://www.onsemi.com

Logo

10 / 15 page

NFVA23512NP2T

www.onsemi.com

Figure 8. Mounting Screws Torque Order

NOTES:

12.Do not make over torque when mounting screws. Much mounting torque may cause DBC cracks, as well as bolts and Al heat−sink

destruction.

13.Avoid one−sided tightening stress. Figure 8 shows the recommended torque order for mounting screws. Uneven mounting can cause

the DBC substrate of package to be damaged. The pre−screwing torque is set to 20∼30% of maximum torque rating.

Figure 9. Under−Voltage Protection (Low−Side)

a1: Control supply voltage rises: After the voltage rises UVDDR, the circuits start to operate when next input is applied.

Input signal

Protection

Circuit State

Control

Supply Voltage

Output Current

Fault Output Signal

UVDDR

UVDDD

RESET

SET

RESET

a2: Normal operation: IGBT ON and carrying current.

a3: Under voltage detection (UVDDD).

a4: IGBT OFF in spite of control input condition.

a5: Fault output operation starts with a fixed pulse width according to the condition of the external capacitor CFOD.

a6: Under voltage reset (UVDDR).

a7: Normal operation: IGBT ON and carrying current by triggering next signal from LOW to HIGH.

ASPM34 Scheda tecnica(PDF) 10 Page - ON Semiconductor