2403678 datasheet(8/12 Pages) PHOENIX

8 / 12 page

AXC F XT ETH 1TX

107237_en_01

PHOENIX CONTACT

8 / 12

Figure 5

Mount bus base module(s)

•

Place the special controller bus base module on the DIN

rail (A).

•

Push the special controller bus base module into the

connection for the bus base module of the module

aligned to the right (B).

•

Place the bus base module of the left-alignable Ethernet

interface on the DIN rail (C).

•

Push the left-alignable Ethernet interface bus base

module into the connection for the special bus base

module of the controller (D).

Align additional AXC F XT ... modules on the left (in

preparation):

Figure 6

Mounting the bus base modules of further

AXC F XT ... modules

•

Remove the cover cap of the preceding bus base

module (A).

•

Place the bus base modules of the additional

AXC F XT ... modules to be aligned on the left on the

DIN rail (B).

•

Push each subsequent bus base module into the

connection of the previous bus base module (C).

7.4

Snapping on electronics modules

•

Working from right to left, place each electronics

module vertically on the corresponding bus base

module and on the DIN rail until it snaps into place with

a click. Make sure that the device plug for the bus base

connection is situated above the corresponding socket

on the bus base module.

7.5

Inserting supply connector

Figure 7

Inserting supply connector

•

Place all supply connectors in position and press firmly.

Make sure that the respective locking latch snaps in.

SZS 1,0X4,0 VDE

C B

2403678 Scheda tecnica(PDF) 8 Page - PHOENIX CONTACT

2403678 Scheda tecnica(HTML) 8 Page - PHOENIX CONTACT

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12

Scheda tecnica Scarica

Link URL