| Motore di ricerca datesheet componenti elettronici |
|
ST25DV64K Scheda tecnica(PDF) 110 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ST25DV64K Scheda tecnica(HTML) 110 Page - STMicroelectronics |
|
110 / 197 page ![]() Figure 53. Get Multiple Block Security Status frame exchange between VCD and ST25DVxxx SOF Get Multiple Block Security request status VCD ST25DVxxx EOF SOF Get Multiple Block Security response status EOF t1 7.6.25 Extended Get Multiple Block Security Status When receiving this command, the device sends back the security status for each address block: 0 when the block is writable, 1 when block is locked for writing. The block security statuses are defined by the area security status. The blocks are numbered from 00h up to the maximum memory block number in the request, and the value is minus one (–1) in the field. For example, a value '06' in the “Number of blocks” field requests to return the security status of seven blocks. This command does not return an error if number of blocks overlap areas or overlap the end of the user memory. The number of blocks is coded on two bytes, so all memory blocks of ST25DV16K-xx and ST25DV64K-xx can be addressed using this command. The Option_flag is not supported. The Inventory_flag must be set to 0. Table 177. Extended Get Multiple Block Security Status request format Request SOF Request_flags Extended Get Multiple Block Security Status UID (1) First block number Number of blocks CRC16 Request EOF - 8 bits 3Ch 64 bits 16 bits 16 bits 16 bits - 1. This field is optional. Request parameter: • Request flags • UID (optional) • First block number (from LSB to MSB) • Number of blocks (from LSB to MSB) Table 178. Extended Get Multiple Block Security Status response format when Error_flags NOT set Response SOF Response_flags Block security status CRC16 Response EOF - 8 bits 8 bits (1) 16 bits - 1. Repeated as needed. Response parameters: • Block security status Table 179. Block security status b7 b6 b5 b4 b3 b2 b1 b0 Reserved for future use All at 0 0: Current block not locked 1: Current block locked ST25DV04K ST25DV16K ST25DV64K RF commands DS10925 - Rev 11 page 110/197 |
|
Link URL |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |