ST25DV64K datasheet(136/197 Pages) STMICROELECTRONICS

136 / 197 page

Device parameters

9.1

Maximum ratings

Stressing the device above the ratings listed in Table 242 may cause permanent damage to the device. These

are stress ratings only, and operation of the device, at these or any other conditions above those indicated in

the operating sections of this specification, is not implied. Exposure to absolute maximum rating conditions for

extended periods may affect the device reliability. Device mission profile (application conditions) is compliant with

JEDEC JESD47 qualification standard. Extended mission profiles can be assessed on demand.

Refer also to the STMicroelectronics SURE program and other relevant quality documents.

Table 242. Absolute maximum ratings

Symbol

Parameter

Min. Max.

Unit

Ambient operating temperature

Range 6

All packages

RF and

I2C interfaces

-40

°C

Range 8

UFDFPN8, UFDFPN12

RF and

I2C interfaces

-40

105

SO8N, TSSOP

RF interface

-40

105

I2C interface

-40

125

TSTG

Storage temperature

Sawn wafer on UV tape, kept in its original packing form

°C

UFDFPN8 (MLP8),SO8N, TSSOP8, UFDFPN12, WLCSP10

-65

150

tSTG

Retain

Sawn wafer on UV tape, kept in its original packing form

9 (1) months

TLEAD

Lead temperature during soldering

See note (2)

°C

VIO

I2C input or output range

- 0.50

6.5

VDCG

Supply GPO CMOS driver

- 0.50

6.5

VCC

I2C supply voltage

- 0.50

6.5

IOL_MAX_SDA

DC output current on pin SDA (when = equal to 0)

IOL_MAX_GPO_OD DC output current on pin GPO open drain (when equal to 0)

1.5

VMAX_1 (3)

RF input voltage amplitude peak to peak between AC0 and AC1, VSS pin left floating VAC0 - VAC1

VMAX_2 (3)

AC voltage between AC0 and VSS, or AC1 and VSS

VAC0 - VSS,

or VAC1 - VSS

- 0.50

5.5

VESD

Electrostatic discharge voltage (human body model) (4)

All pins

2000

1. Counted from ST production date.

2. Compliant with JEDEC Std J-STD-020C (for small body, Sn-Pb or Pb assembly), the ST ECOPACK® 7191395 specification, and the

European directive on Restrictions on Hazardous Substances (RoHS) 2002/95/EU.

3. Evaluated by characterization, not tested in production.

4. AEC-Q100-002 (compliant with JEDEC Std JESD22-A114, C1 = 100 pF, R1 = 1500 Ω, R2 = 500 Ω)

ST25DV04K ST25DV16K ST25DV64K

Device parameters

DS10925 - Rev 11

page 136/197

ST25DV64K Scheda tecnica(PDF) 136 Page - STMicroelectronics

ST25DV64K Scheda tecnica(HTML) 136 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Scheda tecnica Scarica

Link URL