STM8AF6366ITD datasheet(51/95 Pages) STMICROELECTRONICS

51 / 95 page

DS12343 Rev 2

51/95

STM8AF6366

Electrical characteristics

Table 18. Current characteristics

Symbol

Ratings

Max.

Unit

IVDDIO

Total current into VDDIO power lines (source)(1)(2)(3)

1. All power (VDD, VDDIO, VDDA) and ground (VSS, VSSIO, VSSA) pins must always be connected to the

external supply.

2. The total limit applies to the sum of operation and injected currents.

3. VDDIO includes the sum of the positive injection currents. VSSIO includes the sum of the negative injection

currents.

100

IVSSIO

Total current out of VSS IO ground lines (sink)(1)(2)(3)

100

IIO

Output current sunk by any I/O and control pin

Output current source by any I/Os and control pin

-20

IINJ(PIN)(4)

4. This condition is implicitly insured if VIN maximum is respected. If VIN maximum cannot be respected, the

injection current must be limited externally to the IINJ(PIN) value. A positive injection is induced by VIN > VDD

while a negative injection is induced by VIN < VSS. For true open-drain pads, there is no positive injection

current allowed and the corresponding VIN maximum must always be respected.

Injected current on any pin

±10

IINJ(TOT)

Sum of injected currents

Table 19. Thermal characteristics

Symbol

Ratings

Value

Unit

TSTG

Storage temperature range

-65 to 150

°C

Maximum junction temperature

160

Table 20. Operating lifetime(1)

1. For detailed mission profile analysis, please contact the nearest local ST Sales Office.

Symbol

Ratings

Value

Unit

OLF

Conforming to AEC-Q100 rev G

-40 to 125 °C

Grade 1

-40 to 150 °C

Grade 0

STM8AF6366ITD Scheda tecnica(PDF) 51 Page - STMicroelectronics

STM8AF6366ITD Scheda tecnica(HTML) 51 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95

Scheda tecnica Scarica

Link URL