| Motore di ricerca datesheet componenti elettronici |
|
MP3326 Scheda tecnica(PDF) 1 Page - Monolithic Power Systems |
|
|
|||||||||||||||||||||||||||||
MP3326 Scheda tecnica(HTML) 1 Page - Monolithic Power Systems |
|
1 / 36 page ![]() MP3326 16 Channels, 50mA/Ch, LED Driver with Separated PWM Analog Dimming and I2C Interface MP3326 Rev. 1.0 www.MonolithicPower.com 1 1/4/2021 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2021 MPS. All Rights Reserved. DESCRIPTION The MP3326 is a 16-channel WLED driver that can operate from a wide 4V to 16V input voltage range. The MP3326 applies 16 internal current sources in each LED string terminal. The LED current of each channel is set by an external current-setting resistor. The maximum current of each channel is up to 50mA (VIN ≥ 4.5V). The device integrates an I2C interface with up to 10 configurable I2C addresses via an external resistor. This means the MP3326 can support up to 10 cascaded ICs to drive the LED array. Each channel can be enabled or disabled through the I2C. The MP3326 employs both separated PWM dimming and analog dimming for each LED channel, as well as 12-bit resolution PWM dimming and 6-bit analog dimming for each channel. To optimize EMI/EMC performance, the LED current ramp rate and phase shift can be configured. The device can output a refresh signal from the RFSH/FLT pin, and the refresh signal frequency can be set by the register. Open-load protection, short protection, and over- temperature protection (OTP) are integrated into the device. The fault indicator pulls low if a protection is triggered, and then the corresponding fault register is set. The MP3326 is available in a QFN-24 (4mmx4mm) package. FEATURES Wide 4V to 16V Input Voltage Range 16 Channels, 50mA/Ch Maximum (V IN ≥ 4.5V) LED Current Configured by External Resistor 6-Bit Analog Dimming for Each Channel 12-Bit PWM Dimming for Each Channel Selectable 220Hz, 250Hz, 280Hz, or 330Hz PWM Dimming Frequency Refresh Signal Output I2C Interface 10 Addresses Configurable via External Resistor Configurable LED Current Slew Rate 40µs Phase Shift Fault Indicator LED Open-Load Protection LED Short Protection with Configurable Threshold Under-Voltage Lockout (UVLO) Over-Temperature Protection (OTP) ELV Directive II Compliance Available in a QFN-24 (4mmx4mm) Package APPLICATIONS RGB Drivers LED Indicators Instrument Clusters General Displays LED Backlighting All MPS parts are lead-free, halogen-free, and adhere to the RoHS directive. For MPS green status, please visit the MPS website under Quality Assurance. “MPS”, the MPS logo, and “Simple, Easy Solutions” are trademarks of Monolithic Power Systems, Inc. or its subsidiaries. |
Codice articolo simile - MP3326 |
|
Descrizione simile - MP3326 |
|
|
Link URL |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |