NO.

PQ29-101ER

Product Specification and Approval Sheet Version 1 Page 3/4

Designed and manufactured by Fuzetec Technology Co., Ltd., offered by RFE International, Inc.

NOTE : Specification subject to change without notice.

2021/03/25

F1

6. Typical Time-To-Trip at 23℃

7. Material Specification

Terminal pad material: Pure Tin

Soldering characteristics: Meets EIA specification RS 186-9E, ANSI/J-std-002 Category 3

8. Part Numbering and Marking System

Part Numbering System

Part Marking System

F S M D □ □ □ - □ □ - 0805 - R

F

□

Warning: - Each product should be carefully evaluated and tested for their suitability of application.

- Operation beyond the specified maximum rating or improper use may result in damage and possible electrical arcing and/or flame.

- PPTC device are intended for occasional overcurrent protection. Application for repeated overcurrent condition and/or prolonged

trip are not anticipated.

- Avoid contact of PPTC device with chemical solvent, including some inert material such as silicone based oil, lubricant and etc.

Prolonged contact will damage the device performance.

- Additional protection mechanism are strongly recommended to be used in conjunction with the PPTC device for protection against

abnormal or failure conditions.

- Avoid use of PPTC device in a constrained space such as potting material, housing and containers where have limited space to

accommodate device thermal expansion and/or contraction.

A =FSMD010-0805-R /

A =FSMD010-24-0805-R

B =FSMD020-0805-R

C =FSMD035-0805-R

D =FSMD050-0805R /

D =FSMD050-9-0805R

E =FSMD075-0805R

F =FSMD100-0805R

G =FSMD110-0805R

F1 =FSMD010-0805-R

F5 =FSMD050-0805R

FB =FSMD010-24-0805-R

FA =FSMD050-9-0805R

F2 =FSMD020-0805-R

F7 =FSMD075-0805R

F3 =FSMD035-0805-R

F0 =FSMD100-0805R

F3 =FSMD035-0805-R

FC =FSMD110-0805R

Current Rating

Part Identification

Example

Voltage Rating

0.01

0.1

1

10

100

0.1

1

10

Fault Current (A)

A

B C D

E FG

Fuzetec Logo