R34DS0034EU0101 Rev.1.01

Page 30

Mar 13, 2024

ISL73006SLH Datasheet

9.

Ordering Information

10. Revision History

Part Name[1]

1. These Pb-free Hermetic packaged products employ 100% Au plate - e4 termination finish, which is RoHS compliant and compatible with

both SnPb and Pb-free soldering operations.

Radiation Hardness

(Total Ionizing Dose)

Package Description

RoHS Compliant)

Pkg.

Dwg. #

Carrier

Type

Temp.

Range

ISL73006SLHMF

LDR to 75krad(Si)

10 Ld CDFP

K10.B

Tray

-55 to

+125°C

ISL73006SLHMX[2]

2. Die product tested at TA = + 25°C. The wafer probe test includes functional and parametric testing sufficient to make the die capable of

meeting the electrical performance outlined in the Electrical Specifications.

Die

N/A

N/A

ISL73006SLHF/PROTO[3]

3. The /PROTO and /SAMPLE are not rated or certified for Total Ionizing Dose (TID) or Single Event Effect (SEE) immunity. These parts

are intended for engineering evaluation purposes only. The /PROTO parts meet the electrical limits and conditions across temperature

specified in this datasheet. The /SAMPLE parts are capable of meeting the electrical limits and conditions specified in this datasheet.

The /SAMPLE parts do not receive 100% screening across temperature to the electrical limits. These part types do not come with a

Certificate of Conformance.

N/A (For Evaluation

Purposes)

10 Ld CDFP

K10.B

Tray

ISL73006SLHX/SAMPLE[2][3]

Die Sample

N/A

N/A

ISL73006SLHEV1Z[4]

4. The boards use the /PROTO parts. The /PROTO parts are not rated or certified for Total Ionizing Dose (TID) or Single Event Effect (SEE)

immunity.

12VIN to 3.3VOUT Evaluation Board

Includes feature configuration jumpers for loop and slope compensation, test points and transient

load generator

ISL73006SLHDEMO1Z[4]

5VIN to 1.2VOUT Mini Demonstration Board

Minimum BOM implementation with internally set loop and slope compensation

ISL73006SLHDEMO2Z[4]

12VIN to 3.3VOUT Mini Demonstration Board

Configured with externally set loop and slope compensation, set up for wide VIN of 8V to 16V to

3.3VOUT

ISL73006SLHDEMO3Z[4]

5VIN to -5VOUT Mini Demonstration Board

Configured with internally set loop and slope compensation, set up for VIN of 3V to 8V to -5VOUT

Revision

Date

Description

1.01

Mar 13, 2024

Corrected typo on page 1.

Updated EC table Heading and notes.

Updated the typical values for the following specifications:

▪ Standby Enable Voltage

▪ Shutdown Enable Voltage

▪ Enable Hysteresis Voltage

1.00

Dec 13, 2023

Initial release.