AM263P4 datasheet(89/168 Pages) TI2

89 / 168 page

6.11.2 Power Supply Sequencing

This section describes power supply sequencing required to ensure proper device operation.

6.11.2.1 Power-On and Reset Sequencing

AM263Px attempts to simplify the power reset requirements from previous Sitara MCU devices. There is no

sequencing requirement with respect to the primary core digital VDD 1.2V and I/O power 3.3V rails. There are

two on-die LDO that are supplied through the VDDS33 and VDDA33 power nets respectively. These on-die LDO

generate the required VDDS1V8 and VDDA1V8 1.8V digital and analog power. The AM263Px does require the

minimum ramp time be respected for 3.3V power-on. Additional PORz and SOP boot mode latch timing must be

respected by the EVM design as well. Figure 6-2 describes the device power-on sequencing.

Table 6-2. AM263Px Power-On Sequencing

PARAMETER

MIN

MAX

UNIT

tStartup

Time for 1.2V and 3.3V DC-DC converters to startup after being enabled. This is an

arbitrary amount of time - no constraint imposed by the device.

–

tPGood

Time for Power Good signals to be generated from DC-DC converters after rails are

stable. This is an arbitrary amount of time - no constraint imposed by the device.

–

tRamp_3V3

Ramp time of the VDDS3V3 and VDDA3V3 supplies. This is a requirement imposed by

the device.

0.1

–

tSOP_Sampled

Time from PORz de-assertion until the SOP[3:0] pins are sampled. This is a device

internal pentameter. Sampling happens when the internally generated supplies are

stable. For information only. Refer to TSU_SOP and TH_SOP parameters for application

usage.

–

tSU_SOP

Setup time for SOP relative to PORz assertion.

–

μs

tH_SOP

Hold time for SOP relative to WARMRSTn deassertion.

–

μs

tWARMRSTn

Time from PORz de-assertion until the device de-asserts the WARMRESETn signal.

2.0

–

www.ti.com

AM263P4, AM263P2, AM263P4-Q1, AM263P2-Q1

SPRSP81D – OCTOBER 2023 – REVISED MAY 2025

Submit Document Feedback

Product Folder Links: AM263P4 AM263P2 AM263P4-Q1 AM263P2-Q1

AM263P4 Scheda tecnica(PDF) 89 Page - Texas Instruments

AM263P4 Scheda tecnica(HTML) 89 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Scheda tecnica Scarica

Link URL