10

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

• The characters

will display on the cable display, the buzzer beeps

long or

symbol lights up, the buzzer beeps every second, indicating

the voltage of the jumpstarter is not suitable for starting. Charging of

jumpstarter needed.

• When the

symbol flashes, the buzzer beeps a long alarm this

indicates the relay is sticking. The alarm beeps once a second, this

indicates that the temperature is abnormal.

3. When the jumpstarter and vehicle battery are correctly connected, the cable

displays the current battery voltage indicating the vehicle is energized and can be

started.

4. When starting the vehicle, if the

symbol lights up on the cable display with

the

symbol flashing, the buzzer beeps every second, this indicates that

the temperature is abnormal.

5. When the clamps are connected to the jumpstarter, if only the current voltage is

displayed and the cable display, DO NOT let the clamps come into contact with

each other.

6. When the clamps are connected to the jumpstarter, if only the current voltage is

displayed and the cable display, DO NOT connect the clamps to the wrong

terminals.

CARE & MAINTENANCE

Always ensure the cables & clamps are in good condition and the clamps are clean

and corrosion free. If damaged they should be replaced. Keep the unit clean by

wiping with a dry cloth. DO NOT use solvents as a cleaning agent.

Keep the unit fully charged at all times and store away from direct sunlight, moisture

or sources of extreme heat or cold.

NEVER attempt any repair unless you are a qualified technician. Your jump-start has

been designed to give long and trouble free service. If, however, having followed the

instructions in this booklet carefully, you encounter problems, take the unit to your

local CLARKE dealer.