Keep safety first in your circuit designs!

Mitsubishi Electric Corporation puts the maximum effort into making semiconductor products better

and more reliable, but there is always the possibility that trouble may occur with them. Trouble with

semiconductors

may

lead

to

personal

injury,

fire

or

property

damage.

Remember

to

give

due

consideration

to

safety

when

making

your

circuit

designs,

with

appropriate

measures

such

as

(i)

placement of substitutive, auxiliary circuits, (ii) use of non-flammable material or (iii) prevention

against any malfunction or mishap.

Notes regarding these materials

These materials are intended as a reference to assist our customers in the selection of the

Mitsubishi semiconductor product best suited to the customer's application; they do not convey any

license under any intellectual property rights, or any other rights, belonging to Mitsubishi Electric

Corporation or a third party.

Mitsubishi Electric Corporation assumes no responsibility for any damage, or infringement of any

third-party's

rights,

originating

in

the

use

of

any

product

data,

diagrams,

charts,

programs,

algorithms, or circuit application examples contained in these materials.

All information contained in these materials, including product data, diagrams, charts, programs

and algorithms represents information on products at the time of publication of these materials, and

are subject to change by Mitsubishi Electric Corporation without notice due to product improvements or

other reasons. It is therefore recommended that customers contact Mitsubishi Electric Corporation or

an authorized Mitsubishi Semiconductor product distributor for the latest product information before

purchasing a product listed herein.

The information described here may contain technical inaccuracies or typographical errors.

Mitsubishi Electric Corporation assumes no responsibility for any damage, liability, or other loss

rising from these inaccuracies or errors.

Please also pay attention to information published by Mitsubishi Electric Corporation by various

means, including the Mitsubishi Semiconductor home page (http://www.mitsubishichips.com).

When using any or all of the information contained in these materials, including product data,

diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total

system before making a final decision on the applicability of the information and products. Mitsubishi

Electric Corporation assumes no responsibility for any damage, liability or other loss resulting from

the information contained herein.

Mitsubishi Electric Corporation semiconductors are not designed or manufactured for use in a

device or system that is used under circumstances in which human life is potentially at stake. Please

contact Mitsubishi Electric Corporation or an authorized Mitsubishi Semiconductor product distributor

when considering the use of a product contained herein for any specific purposes, such as apparatus or

systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.

The

prior

written

approval

of

Mitsubishi

Electric

Corporation

is

necessary

to

reprint

or

reproduce in whole or in part these materials.

If these products or technologies are subject to the Japanese export control restrictions, they

must be exported under a license from the Japanese government and cannot be imported into a country

other than the approved destination.

Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the

country of destination is prohibited.

Please contact Mitsubishi Electric Corporation or an authorized Mitsubishi Semiconductor product

distributor for further details on these materials or the products contained therein.