HD6432142 datasheet(147/1177 Pages) RENESAS

147 / 1177 page

Section 4 Exception Handling

Rev. 4.00 Sep 27, 2006 page 103 of 1130

REJ09B0327-0400

Section 4 Exception Handling

4.1

Overview

4.1.1

Exception Handling Types and Priority

As table 4.1 indicates, exception handling may be caused by a reset, trap instruction, or interrupt.

Exception handling is prioritized as shown in table 4.1. If two or more exceptions occur

simultaneously, they are accepted and processed in order of priority. Trap instruction exceptions

are accepted at all times in the program execution state.

Exception handling sources, the stack structure, and the operation of the CPU vary depending on

the interrupt control mode set by the INTM0 and INTM1 bits in SYSCR.

Table 4.1

Exception Types and Priority

Priority

Exception Type

Start of Exception Handling

High

Reset

Starts immediately after a low-to-high transition at the

RES pin, or when the watchdog timer overflows.

Trace*

Starts when execution of the current instruction or

exception handling ends, if the trace (T) bit is set to 1.

Interrupt

Starts when execution of the current instruction or

exception handling ends, if an interrupt request has been

issued.*

Direct transition

Started by a direct transition resulting from execution of a

SLEEP instruction.

Low

Trap instruction (TRAPA)*

Started by execution of a trap instruction (TRAPA).

Notes: 1. Traces are enabled only in interrupt control modes 2 and 3. (They cannot be used in

this LSI.) Trace exception handling is not executed after execution of an RTE

instruction.

2. Interrupt detection is not performed on completion of ANDC, ORC, XORC, or LDC

instruction execution, or on completion of reset exception handling.

3. Trap instruction exception handling requests are accepted at all times in the program

execution state.

HD6432142 Scheda tecnica(PDF) 147 Page - Renesas Technology Corp

HD6432142 Scheda tecnica(HTML) 147 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Scheda tecnica Scarica

Link URL