| Motore di ricerca datesheet componenti elettronici |
|
M306S0FADGP Scheda tecnica(PDF) 85 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
M306S0FADGP Scheda tecnica(HTML) 85 Page - Renesas Technology Corp |
|
85 / 208 page ![]() Rev.5.01 Dec 10, 2009 page 85 of 201 REJ03B0014-0501 M16C/6S Group Item Specification Count source • Two-phase pulse signals input to TAiIN or TAiOUT pins (i = 4) Count operation • Up-count or down-count can be selected by two-phase pulse signal • When the timer overflows or underflows, it reloads the reload register con- tents and continues counting. When operating in free-running mode, the timer continues counting without reloading. Divide ratio 1/ (FFFF16 - n + 1) for up-count 1/ (n + 1) for down-count n : set value of TAi register 000016 to FFFF16 Count start condition Set TAiS bit of TABSR register to “1” (= start counting) Count stop condition Set TAiS bit to “0” (= stop counting) Interrupt request generation timing Timer overflow or underflow TAiIN pin function Two-phase pulse input TAiOUT pin function Two-phase pulse input Read from timer Count value can be read by reading timer A4 register Write to timer • When not counting and until the 1st count source is input after counting start Value written to TAi register is written to both reload register and counter • When counting (after 1st count source input) Value written to TAi register is written to reload register (Transferred to counter when reloaded next) Select function • Multiply-by-4 processing operation (timer A4) If the phase relationship is such that TAkIN(k=4) pin goes “H” when the input signal on TAkOUT pin is “H”, the timer counts up rising and falling edges on TAkOUT and TAkIN pins. If the phase relationship is such that TAkIN pin goes “L” when the input signal on TAkOUT pin is “H”, the timer counts down rising and falling edges on TAkOUT and TAkIN pins. Table 1.12.3. Specifications in Event Counter Mode (when processing two-phase pulse signal with timer A4) TAkOUT TAkIN (k=3,4) Count up all edges Count up all edges Count down all edges Count down all edges Timer A |
|
Link URL |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |