WM8912 datasheet(36/128 Pages) WOLFSON

Il numero della parte	WM8912

Spiegazioni elettronici	Ultra Low Power DAC with Headphone Driver for Portable Audio Applications

PDF	128 Pages

Scroll/Zoom	100%

Produttore elettronici	WOLFSON [Wolfson Microelectronics plc]

Homepage	http://www.wolfsonmicro.com

Logo

36 / 128 page

WM8912

Production Data

PD, Rev 4.0, September 2010

DAC SLOPING STOPBAND FILTER

Two DAC filter types are available, selected by the register bit DAC_SB_FILT. When operating at

lower sample rates (e.g. during voice communication) it is recommended that the sloping stopband

filter type is selected (DAC_SB_FILT=1) to reduce out-of-band noise which can be audible at low

DAC sample rates. See “Digital Filter Characteristics” for details of DAC filter characteristics.

ADDRESS

BIT

LABEL

DEFAULT

DESCRIPTION

R33 (21h)

DAC Digital 1

DAC_SB_FILT

Selects DAC filter characteristics

0 = Normal mode

1 = Sloping stopband mode

Table 21 DAC Sloping Stopband Filter

DAC OVERSAMPLING RATIO (OSR)

The DAC oversampling rate is programmable to allow power consumption versus audio performance

trade-offs. The default oversampling rate is low for reduced power consumption; using the higher

OSR setting improves the DAC signal-to-noise performance.

ADDRESS

BIT

LABEL

DEFAULT

DESCRIPTION

R33 (21h)

DAC Digital 1

DAC_OSR128

DAC Oversample Rate Select

0 = Low power (normal OSR)

1 = High performance (double OSR)

Table 22 DAC Oversampling Control

WM8912 Scheda tecnica(PDF) 36 Page - Wolfson Microelectronics plc