JS28F128P33BF70 datasheet(5/88 Pages) MICRON

5 / 88 page

Datasheet

Jul 2011

Order Number:208034-04

P33-65nm SBC

1.0

Functional Description

1.1

Introduction

This document provides information about the Numonyx® P33-65nm Single

Bit per Cell (SBC) Flash Memory and describes its features, operations, and

specifications.

P33-65nm SBC device is offered in 64-Mbit and 128-Mbit densities. Benefits include

high-speed interface NOR device, and support for code and data storage. Features

include high-performance synchronous-burst read mode, a dramatical improvement in

buffer program time through larger buffer size, fast asynchronous access times, low

power, flexible security options, and two industry-standard package choices.

P33-65nm SBC device is manufactured using 65nm process technology.

1.2

Overview

This family of devices provides high performance at low voltage on a 16-bit data bus.

Individually erasable memory blocks are sized for optimum code and data storage.

Upon initial power-up or return from reset, the device defaults to asynchronous page-

mode read. Configuring the RCR enables synchronous burst-mode reads. In

synchronous burst mode, output data is synchronized with a user-supplied clock signal.

A WAIT signal provides an easy CPU-to-flash memory synchronization.

In addition to the enhanced architecture and interface, the device incorporates

technology that enables fast factory program and erase operations. The device features

a 256-word buffer to enable optimum programming performance, which can improve

system programming throughput time significantly to 1.8MByte/s.

The P33-65nm SBC device supports read operations with VCC at 3.0V, and erase and

program operations with VPP at 3.0V or 9.0V. Buffered Enhanced Factory Programming

provides the fastest flash array programming performance with VPP at 9.0V, which

increases factory throughput. With VPP at 3.0V, VCC and VPP can be tied together for a

simple, ultra low power design. In addition to voltage flexibility, a dedicated VPP

connection provides complete data protection when VPP ≤ VPPLK.

The Command User Interface is the interface between the system processor and all

internal operations of the device. An internal Write State Machine automatically

executes the algorithms and timings necessary for block erase and program. A Status

An industry-standard command sequence invokes program and erase automation. Each

erase operation erases one block. The Erase Suspend feature allows system software to

pause an erase cycle to read or program data in another block. Program Suspend

allows system software to pause programming to read other locations. Data is

programmed in word increments (16 bits).

The one-time-programmable (OTP) Register allows unique flash device identification

that can be used to increase system security. The individual Block Lock feature provides

zero-latency block locking and unlocking. The P33-65nm SBC device adds enhanced

protection via Password Access Mode which allows user to protect write and/or read

access to the defined blocks. In addition, the P33-65nm SBC device could also provide

the full-device OTP permanent lock feature.

JS28F128P33BF70 Scheda tecnica(PDF) 5 Page - Micron Technology

JS28F128P33BF70 Scheda tecnica(HTML) 5 Page - Micron Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88

Scheda tecnica Scarica

Link URL