CSD19503KCS

SLPS479 – DECEMBER 2013

www.ti.com

MECHANICAL DATA

KCS Package Dimensions

Notes:

1. All linear dimensions are in inches.

2. This drawing is subject to change without notice.

3. Lead dimensions are not controlled within "C" area.

4. All lead dimensions apply before solder dip.

5. The center lead is in electrical contact with the mounting tab.

6. The chamfer at "F" is optional.

7. Thermal pad contour at "G" optional with these dimensions.

8. "H" falls within JEDEC TO-220 variation AB, except for minimum lead thickness, minimum exposed pad

length, and maximum body length.

Table 1. Pin Configuration

Position

Designation

Pin 1

Gate

Pin 2 / Tab

Drain

Pin 3

Source

6

Submit Documentation Feedback

Copyright © 2013, Texas Instruments Incorporated

Product Folder Links: CSD19503KCS