UPD17708 datasheet(225/356 Pages) NEC

Il numero della parte	UPD17708

Spiegazioni elettronici	4-BIT SINGLE-CHIP MICROCONTROLLERS WITH DEDICATED HARDWARE FOR DIGITAL TUNING SYSTEM

PDF	356 Pages

Scroll/Zoom	100%

Produttore elettronici	NEC [NEC]

Homepage	http://www.nec.com/

Logo

225 / 356 page

225

µPD17704, 17705, 17707, 17708, 17709

16.2.6 Wait control block and acknowledge control block

The wait control block keeps communication waiting or releases communication from the wait status.

The condition under which communication is kept waiting is set by the SIO0WRQ0 and 1 flags (bits 0 and 1 of serial

I/O0 wait control register).

Serial communication is started when the SIO0NWT flag (bit 2 of serial I/O0 wait control register) is set (released

from the wait status).

The communication status can be detected by the SIO0NWT flag.

When “0” is written to the SIO0NWT flag while communication is released from the wait status, the wait status is

set. This is called forced wait status.

The acknowledge control block outputs and detects an acknowledge signal in the I2C bus mode.

An acknowledge signal is set and read by the SBACK flag (bit 3 of serial I/O0 wait control register).

Figure 16-7 shows the configuration of the serial I/O0 wait control register.

Figure 16-8 shows the configuration of the serial I/O0 wait status judge register.

UPD17708 Scheda tecnica(PDF) 225 Page - NEC