MICROWAVE CORPORATION

8 - 79

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order Online at www.hittite.com

8

HMC314

v02.0802

The circuit board used in the final application should use RF

circuit design techniques. Signal lines should have 50 ohm

impedance while the package ground leads should be con-

nected directly to the ground plane similar to that shown. A

sufficient number of via holes should be used to connect

the top and bottom ground planes. The evaluation circuit

board shown is available from Hittite upon request.

Evaluation PCB

List of Material

GaAs InGaP HBT MMIC DRIVER

AMPLIFIER, 0.7 - 4.0 GHz

Item

Description

J1, J2

PC Mount SMA Connector

J3, J4, J5

DC Pins

U1

HMC314

PCB*

104198 Evaluation PCB 1.5” x 1.5”

*Circuit Board Material: Roger 4350